Have you seen a car jack? That little device that takes a car up higher from the floor. We do that to get some space under a car so that we can work.
Having some clearance below makes working with the car engine or anything in the bottom of the car much easier. A motorcycle lift does the same thing for motorcycles.
If you’ve been thinking of getting a bike lift or just want to know about them, knowing how high a motorcycle can be lifted is as important as knowing the other material-based aspects of this tool.
This tool isn’t only good for how high it can lift but build, flexibility, durability, and overall composition is vital as well.
How High Does a Motorcycle Lift Go?
Usually, you’ll find motorcycle lifts that can lift a bike up to 30 to 40 inches. But is it all that you have to know? Are there not other aspects that determine the raised capacity and loading powers of a lift?
There are. And we will look at these now. It is necessary to know those related factors to get an overall picture of this tool’s capacity.
Some Factors to Know About a Motorcycle Lift
We’ll talk briefly about some points that can make a motorcycle lift good or bad. Once you know about these, choosing and understanding the qualities of a bike lift will make much more sense to you than what you know now.
- Jack Type – Scissor
This is the most common type of bike lift you’ll see. They are everywhere, and it’s quite unlikely that you’ll see these less often than you’d see the other types. The design is simple: it’s a scissor or x’s shape, and there are no extra moving parts inside or around this device.
Because it has a simple design, it comes cheap too. But don’t be fooled into determining its quality by its price. With this design, it has been lifting super high weight from the beginning of its innovation and still doing well.
There is no considerable maintenance involved with a jack-type scissor. You’ll need to use a spanner every time you use the lift.
The task of a jammer is to rotate its mechanical gear to get the lift up or down. And that’s basically all the core stuff you need to know about a jack-type lift.
- Jack Type – Hydraulic
The problem with the basic scissor-type lifts is they have less load capacity and risk losing their center of gravity with heavier bike loads. A hydraulic bike lift can be a good alternative in this case.
Hydraulic lifts use fluid-filled hydraulic pumps to stabilize higher loads in control, and because of this ability, it’s likely that you will notice higher lift heights with hydraulic lifts. These have better control of the center of gravity even while the bike is lifted high.
Even if you use the best bike lift that promises never to lose the center of gravity, you should never trust the device. If a bike falls down, especially from a high place, the damage can be severe and easily cost you thousands. Thus, taking extra safety is better than trusting a device that may make you regret it later.
Try to use some straps or cradles to hold the lift tightly onto the floor. It will ensure a good amount of stability as well as lessen the risk of a bike’s fall.
- Wider Area
If the lift you work with has a good surface area on the floor, then there’s less risk of a fall.
Simple science. More area helps keep a bike’s center of gravity in the right position, and the process helps maintain stability. So while checking how high a lift goes, check its surface area and choose the one with the most area.
You should know the capacity range of the lift before you put a bike on it. Suppose a lift has 38 inches of height capacity, but the bike you’re putting on the lift is way higher than the weight capacity range. What would happen?
It could be several things.
The lift jack might get damaged or make the lift unstable. Some risks are here. So capacity is important, along with lifting height range.
Some lifts have options to add extra stabilizers around them. You can choose them if you’d like or use other methods of stabilizing them. Remember, the more you stabilize a lift, the higher you can take a bike without the risk of destabilizing it.
Are Motorcycle Lifts Safe?
Motorcycle lifts are a convenient way to store and work on your bike, but are they safe?
Lifts can be dangerous if not used correctly. In order to use a lift safely, you need to follow the manufacturer’s instructions. Make sure the lift is properly secured to the ground and that the motorcycle is properly tied down. Never get on or off of the motorcycle while it is on the lift.
You now know not only the answer to the question regarding how high does a motorcycle lift go as well as aspects around it. You’ve got some clear ideas now that are going to make choosing a motorcycle lift an easy job for you.